Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discreet, doesn't use LED indications or key fobs and is hidden within the wiring of the vehicle.
It also allows users to temporarily disable the system by using Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning and relay attacks. The system links directly to your car's ECU and is protected by a unique PIN code that you can choose. It is undetectable by thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled using circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers who are approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm system to complete the protection package for your vehicle.
To prevent an accidental deployment of airbags or short circuits The installer must first disconnect your battery. After that the installer is able to safely begin work. Basic hand tools are useful for securing connections with precision, while a multimeter can be used to check electrical values and safety. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. In addition, the user's manual offers specific instructions tailored to the Ghost Immobiliser model you have.
It is important to choose the right grounding spot that is free of any paint or debris during installation. The installer must ensure that the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be plugged in or soldered depending on the model. A quality connector is recommended to ensure a durable and secure connection.
Once the install is complete, the customer can activate the Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. The customer must press the icon for service on the dashboard five times within two seconds. After this is done, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who regularly rents out their cars on platforms like Turo. An immobiliser can reduce the cost of insurance, as it decreases the likelihood of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser if you want to protect your vehicle from theft. It prevents your car from running even the case that someone steals or copies your key. It is possible because of its advanced technology that stops the engine from starting until the right PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the best security system that protects your car's pride and joy, keeping its value intact in the event that you decide to sell it in the future.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical issues and malfunctions of the system. First, you have to locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. Then, you can begin to connect the wires for the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, make sure to cover the connections with heat shrink tubing and insulation tape to protect them from electrical short circuits and other issues.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser works. Once you have verified that everything is functioning properly, you can install the immobiliser in a secure location in the vehicle. Make sure to hide it in a secure manner to prevent thieves from getting into it.
car immobiliser ghost has been TASSA (Tracker and Aftermarket Security System Association), which means it's a top-quality deterrent for car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. The device is simple to use, and can be set to the service valet setting to ensure that your vehicle will not be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to your vehicle's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals and instead uses CAN data to communication with your ECU. Additionally, it doesn't require any modifications to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition of your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking while preserving the value of your pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser if you need to give your car over for service or valet park.
To complete a Ghost Immobiliser installation, you'll have to find an energy source that is constant (12V) and a grounding point. Make sure both are well-insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires. This will decrease the chance of theft by thieves. To avoid making mistakes, double-check these points and mark them with the use of tape or labels. Check every connection for signs that they are wearing out. Make sure that all connections are securely in place, and are properly sealed. Also, don't forget test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating properly and that all connections and insulation are secure. If there are any issues, you must be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to stop unauthorized engine start. Its cutting-edge technology protects your vehicle against hacking and key cloning as well as other methods commonly used by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unique features, paired with its discreet design makes it a sought-after option for both car enthusiasts and security conscious drivers.
It is crucial to follow the procedures for installation to ensure complete integration of the Ghost Immobiliser. Consult the wiring diagram of the vehicle as it will assist you in locating and connecting the wires. After that, you'll need determine the power source and grounding points. Once you have located them, you will be required to mark the points so that they are easy to identify when installing. It's important to use high-quality materials and tools. Hand tools are essential to aid in making precise connections. A multimeter will verify electrical values and guarantee safety. Cable ties and insulation tape can help keep connections tidy and neat. Also, a user's guide will give specific guidelines specifically tailored to your Ghost model.
Before beginning the installation, it's important to test the system by entering the PIN code, then starting the vehicle. This step will confirm the immobiliser is working as it should and prevent unauthorised vehicle starts. This step should be performed regularly as part of your routine vehicle inspections in order to ensure that the system is working properly.
After the installation has been completed, you are now able to start driving your car with confidence. The Ghost will guard your vehicle from would-be car thieves. It will ensure that no one can escape with your car if they do not have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempt to steal or tamper that could lead to the location of your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those from most major manufacturers. If you are looking to secure your vehicle using this advanced device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA registered installer, which guarantees we follow strict standards for the installation of our products. This guarantees customers as well as insurance companies and law enforcement agencies that all installations are carried out safely and properly.