Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your precious vehicle from key-long theft and relay theft. With a personalised PIN sequence, unless they know the code, your vehicle won't start!
Transport Mode allows you to temporarily disable the device, which is perfect for vehicle transportation and servicing. It can be activated again by entering a different PIN code.
No Led Indications or Key Fobs
The Ghost 2 immobiliser offers a powerful defence against modern car-theft techniques. Its undetectable installation and engine start blocking will reduce the risk of your vehicle being stolen, which could give you peace of mind and potentially even save you money on insurance premiums.
It operates without emitting radio frequency signals, which makes it unrecognisable by conventional scanners and can't be hacked using common methods such as key cloning or signal jamming. The device uses existing buttons on your vehicle such as those on the steering wheel, door panels, and the center console to generate an individual, programmable PIN code sequence that is up to 20 presses long. If the correct sequence is entered or in the event that a beacon or mobile app is employed, only the vehicle owner can start the engine, providing an additional layer of security against thieves.
You can also activate an easy service mode in situations such as valet parking or servicing, which require you to temporarily disable your system. The mobile app makes it simple to do this, while ensuring that your vehicle is secure while being worked on. Once the job is completed it is easy to switch back to secure mode. This will ensure that your vehicle is secured throughout the day.
In contrast to other aftermarket immobilisers that work with a fob and a fob, the Ghost 2 can be operated directly from the vehicle's existing buttons, making it far simpler to use than traditional systems. The app can also function as a spare key in emergencies and allows you to drive with the security off without needing to enter your PIN code.
No Radio Frequency Signals
Unlike traditional security systems that come with their own remote The Ghost 2 immobiliser doesn't require any additional key fobs and can be operated using existing buttons on the steering wheel or the centre console. It's also undetectable by thieves using RF scanning or code grabbing technology, meaning your car won't be able to start for them even if they do get your keys.
The device uses a unique 'password' sequence of buttons that locks the engine. The personalised PIN code can be entered through the app or using the buttons on the steering wheel and centre console. You can also lock the gearbox, so that your car is not able to be driven unless you've got your key or enter your pin code. The device can be set in Transport mode to allow you to drive your vehicle without having to enter your pin code. This can provide additional protection for your vehicle if it is parked at a valet or service.
The Ghost 2 immobiliser is designed to serve as a deterrent for theft that is as discreet as it can be, making it an attractive alternative for those who have spent lots of money customising their vehicles or own very expensive or rare cars. Many have reported that this device is a great method to protect their vehicles from being stolen. Some have even reported stories of attempted car thefts which were thwarted by the device. ghost 2 immobiliser reviews is also very versatile. Customers have reported that it works with their regular keys as well as with the emergency button on their vehicle, giving them peace-of-mind when they're away from their vehicle.
No Radio Frequency Scanners
Secure your vehicle from key cloning, hacking and key theft with a Ghost immobiliser. The system uses the buttons inside your vehicle, like the ones on your dashboard and steering wheel, to create a unique and programmable sequence of buttons that only you know. Your car won't start without this sequence. The combination of a distinct disarm sequence and the absence of radio frequency signals makes it extremely difficult to penetrate or bypass.
In contrast to Thatcham approved devices that rely on radio frequency scanning the Ghost CAN Immobiliser works silently and without any external signals to do its magic. It's a much safer option and comes with insurance-approved status when installed by an TASSA approved installer (we're one of them! ).
Due to the nature and way in which the Ghost immobiliser works with your vehicle, it is recommended that an expert installer complete its installation. This ensures that it's seamlessly integrated into your vehicle's systems, resulting in maximum performance and a significantly less risk of failure.
Professional installation is often accompanied by warranties and support to further enhance the value of your purchase. This is a major protection against thieves who are less likely to try any attempt to bypass the device because of its extensive security features and skilled installation.
The Ghost is not just an effective deterrent to thieves, but it's designed to be simple to use. It can be programmed to automatically rearm for a set period of time after parking your vehicle. This means you don't have to keep track of your PIN every time. It also allows the flexibility of Service/Valet Mode if you need to hand your vehicle over for servicing or valet parking. This can be disabled or enabled depending on your preference. an easy sequence of indication.
No Wire Cutting
The Ghost 2 is non-invasive and doesn't require cutting of wires during installation. It connects to the vehicles CAN data network and is programmed with a unique PIN which prevents other people from starting your engine if they don't have a personalised PIN sequence or app authorization.
It is also unnoticeable by the specialised scanning tools which some thieves use, and it is quiet because it doesn't transmit radio signals like other immobilisers. It's weatherproof, sealed and so small that it can be concealed in any vehicle making it near impossible to spot.
The Ghost II also has the possibility of being placed into a 'transport mode, which allows it to be used for short periods of time without the need for an individual PIN. This is great for situations like loaning the car to someone in the family or a friend or in emergency situations that allow you to get your car started and drive away quickly and safely.
When installing the Ghost II, it's important to work in a well-lit area and wear safety gear for working with electrical and tool components. A basic set of tools will help you make precise connections. A multimeter can help check electrical values and ensure that your wiring is secure. Cable tie and insulation tape can be used to shield any wires that have been cut or exposed or to join them during installation.
It is also essential to disconnect the battery prior to trying any wiring work on your vehicle. This will prevent any airbag deployments or electrical shocks when the Ghost II is connected to the vehicle's system when the battery is disconnected.
Easy to Install
The Ghost immobiliser is a unique next-generation device that works by connecting directly to your vehicle's CAN Data Network and using a unique PIN Code to stop your car from starting. This makes it much more difficult to break than conventional alarm systems or aftermarket key fobs and also provides greater protection against key cloning hacking and relay attacks.
The unit can be hidden in your vehicle and uses the buttons that are already present on your dashboard and the steering wheel to create an sequence that only you know. This blocks thieves from being able make use of a duplicate key to start your vehicle. It additionally, it prevents them from using an instrument for diagnosing that thrives on hacking into the OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus through a constant 12V supply identified as well as a grounding connection. A multimeter is required to identify the right wires. Basic hand tools can be used for the installation. To shield the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can be used to keep the wiring neat.
After installation, the device is in a learning mode, and records your unique sequences and buttons to create your unique pin code. This information is later stored in the CAN data network, which makes it impossible for anyone else to replicate your sequence and even start your car.
Should you ever forget your PIN Code or sell your car, or an option becomes unavailable, there is an emergency override function known as Transport Mode. This will disable the Ghost system completely, but it will be activated automatically once you reach 31mph for more than 15 minutes or when you enter your PIN Code. This is great for those who rent out their vehicles via services like Turo or ZipCar.